Social Responsibility Report

Decorative mask

2023-01-14

1. It depicts a British Airways se coat and mask. Choose a color and most of your mask will be. Use the brush to completely cover the paint on the mask. Acrylic paint works best on latex masks. You can wait for the phone to dry the coating, or use a hair dryer to speed up the process. 2. The press coating including other colors of British Airways is dry. Add colors to distinguish the characteristics of your mask. Clean your brush between each color to avoid damaging the lighter tones. 3. Add decorative accessories and functional masks. Including all decoration that cannot be finished with paint only. Try fake hair, sequins or fabric, depending on the style you want. Ensure that any decorative functions added are well protected. Glue is an ideal adhesive. This is the stage and your mask will start to live! If you have a fixed plan for the appearance of the mask you want, carefully use the appropriate color according to your design. Otherwise, try different colors to make your mask more creative. There are various accessories that you can add to the mask. Try adding glasses, hats, fake furs, spikes, false teeth or hoods. Your local handicraft shop will sell many different options to give you inspiration to decorate your mask. 4. Spray sealant on the mask to protect spray. Make sure the paint on the mask is dry. Then take your mask to a well-ventilated place and apply protective sealant. If you don't want to spray masks at home, go outdoors. This spray will make your facial mask durable.

Cover the head of the foam model with clay

2023-01-14

Cover the head of the entire foam model with model clay to ensure that all adhesive tapes and foam sheets are covered. The clay will become soft under your temperature, and it is easy to expand. Before you start using it, make sure that the modeling clay is wet enough. Take a small clay model and roll it into a cylinder. Fold the cylinder in half. If the cylinder breaks, add more water. If the cylinder can bend smoothly, then the clay can be used. If you like, you can leave holes around your eyes, nose and mouth.

Use adhesive tape to stick foam sheets to create basic shapes on the head of the manikin

2023-01-14

The foam model head will be the starting point of your mask. Cut the foam into the desired shape and length, and stick them firmly to the head of the foam manikin to highlight features. Each piece of foam plastic can use about 2 strips of adhesive tape. It is not important that the foam or tape looks messy or untidy. You won't see this in the finished product, because the important thing is the overall shape. The clay you will use next can hide any tiny flaws. Try adding some foam around the ear to make a bigger ear, adding some foam above the nose to make a bigger nose, or extending from the top of the manikin to make an angle. Making o with foam has only the larger characteristics of the head of the foam model. Smaller features can be added later using clay. Pipe tape is ideal because it is strong enough to hold foam in place.